TECHNICAL SPECIFICATION
GENERAL ELECTRICAL SPECIFICATIONS

System Voltage: 400V / 415V AC

Frequency: 50 / 60 Hz

Protection Class: IP42 to IP65

Form of Separation: Form 2, Form 3, Form 4

Standards: IEC 61439-1/2, IEC 60204-1, IEC 60831, IEC 60947-6-1, IEEE 519, ISO 8528

Enclosure Type: Floor-standing / Wall-mounted (modular steel construction, powder coated RAL7035)

1. LOW VOLTAGE DISTRIBUTION PANEL (LV PANEL)

Rated Current: Up to 6300A

Short Circuit Withstand: Up to 100kA for 1 sec

Busbar Material: High-conductivity Copper / Aluminum

Mounting: Indoor or Outdoor with canopy

Color: RAL7035, textured powder-coated

Application: Main & sub-main power distribution

2. CAPACITOR BANK (APFC PANEL)

Power Rating: 25 to 1000 kVAR

Control Type: Automatic / Manual (via APFC relay)

Detuned Reactor: 7% / 5.67% for harmonic filtration

Capacitor Type: Heavy-duty cylindrical / box-type

Cooling: Natural / Forced air cooling

Protection: MCCB/MCB, fuses, thermal trip

3. PLC PANEL (AUTOMATION PANEL)

Supported Brands: Siemens, Schneider, Omron, Allen-Bradley

Power Supply: 24VDC / 230VAC

I/O Type: Digital / Analog (expandable)

Communication: Modbus RTU, Modbus TCP, Ethernet/IP, Profinet, Profibus

Display Interface: HMI Touchscreen or SCADA-ready

Wiring & Layout: As per IEC 60204-1

4. MOTOR CONTROL CENTER (MCC PANEL)

Feeder Capacity: Up to 6300A

Starter Types: DOL, Star-Delta, VFD, Soft Starter

Compartment Type: Fixed / Draw-out / Plug-in

Busbar Rating: Up to 100kA

Separation Form: Form 2, Form 3, Form 4b

Panel Type: Modular with multiple vertical tiers

5. ACTIVE HARMONIC FILTER PANEL (AHF PANEL)

Filter Rating: 25A to 600A

Harmonic Compensation: Up to 50th harmonic

Technology: DSP-based real-time control

Response Time: <300 microseconds

Connection Type: 3-phase 3-wire / 4-wire

Compliance: IEEE 519, IEC 61000-4-7

6. SYNCHRONIZATION PANEL

Genset Support: Up to 4000 kVA per generator

Synchronization Type: Automatic / Manual

Load Sharing: Active (kW) / Reactive (kVAR)

Controllers: ComAp, DEIF, Deep Sea, Woodward

Breaker Control: MCCB / ACB with bus tie

Display: HMI with event/alarm logs

7. AUTOMATIC TRANSFER SWITCH PANEL (ATS PANEL)

Transfer Rating: Up to 4000A

Transfer Time: <500 ms (Open / Closed transition)

Control Logic: PLC or microprocessor-based

Switch Type: Contactor / MCCB / ACB based

Status Indications: Source availability, switch status, fault indicator

Mounting: Indoor/Outdoor with protective enclosure

For further specifications or to inquire about this equipment and ReflowX's logistics services, Please contact ReflowX at info@reflowx.com