General Specifications:

• Model: MTU 12V2000 P82L
• Year: 2015
• Manufacturer: MTU Friedrichshafen GmbH (part of Rolls-Royce Power Systems)
• Engine Type: 12-cylinder, V-type, diesel engine
• Application: Marine propulsion for yachts, commercial vessels, offshore platforms, and other maritime applications
• Configuration: V12 engine with turbocharging and intercooling
• Fuel Type: Diesel
• Cooling System: Freshwater-cooled with an intercooler and seawater heat exchanger for efficient cooling
• Fuel System: Common-rail direct fuel injection for enhanced fuel efficiency and reduced emissions

Performance Specifications:

Power Output:

• Maximum Output: 1,000 kW (1,340 hp) at 2,300 RPM
• Continuous Power: 920 kW (1,232 hp) at 2,100 RPM (dependent on load and operational conditions)

Engine Speed:

• Rated speed: 2,300 RPM
• Continuous operation speed: 2,100 RPM

Torque Output:

• Maximum Torque: Approximately 5,000 Nm at 1,500 RPM
• Continuous Torque: Approximately 4,600 Nm at 1,400 RPM

Compression Ratio: 16.5:1 (optimized for fuel efficiency and power)

Fuel Consumption:

• Fuel consumption at 100% load: Approximately 195 g/kWh (specific consumption varies depending on operational conditions)

Operational Features:

Turbocharging and Intercooling:

• The MTU 12V2000 P82L is equipped with a turbocharger and intercooler to increase engine efficiency, providing better performance and fuel consumption under different load conditions.

Engine Control and Monitoring:

• The engine is fitted with advanced electronic control systems for automatic speed regulation, load handling, and fuel efficiency.
• Integrated digital monitoring system for real-time performance tracking, diagnostics, and remote control.

Emission Compliance:

• Designed to meet the latest IMO Tier II emission standards for marine engines, ensuring reduced NOx and CO2 emissions.

Start-up:

• Fast start-up capability, typically requiring less than 10 minutes from a cold start to full load.

Physical Specifications:

Dimensions (L x W x H):

• Length: 2,410 mm (95.3 inches)
• Width: 1,310 mm (51.6 inches)
• Height: 1,660 mm (65.4 inches)

Weight:

• Weight (dry): Approximately 2,550 kg (5,622 lbs), depending on configuration
• Weight (wet): Approx. 2,800 kg (6,173 lbs) including lubricants, cooling fluids, and other necessary fluids for operation

Exhaust System:

• Exhaust temperature: Approximately 500°C at full load
• Exhaust gas flow: Approximately 30 - 35 kg/s depending on load

Cooling System:

• Cooling type: Closed-loop freshwater cooling system with seawater heat exchanger
• Cooling capacity: Approximately 35-40 kW depending on conditions and operational load

For further specifications or to inquire about this equipment and ReflowX's logistics services, Please contact ReflowX at info@reflowx.com